Modify Selection
- Hazard prevention and control:
- Ground control
- or
- Span design
- or
- Entry design
- or
- Roof beam design
- or
- Skin control
- or
- Slope design
- or
- Highwall design
- or
- Pillar design
Home Links
Results 41 - 50 of 140
-
3/4/2020 - Research projectsA project to develop engineering-based procedures that will contribute to the practical design of ground control systems in gateroad excavations and longwall extractions.
-
1/1/2020 - Peer reviewed journal articlesA paper presenting a new equation for calculating accurate abutment angles for deeper mining cases. The new equation was tested using both ARMPS2010 and LaModel for the entire case history database of ARMPS2010.
-
1/1/2020 - Peer reviewed journal articlesAn article covering geologic exploratory methods, data organization, and the value of collecting and interpreting geologic information in coal mines to enhance safety and production.
-
1/1/2020 - Reports of InvestigationsThis part 2 of a two-part series describes ground stress in mining by calibrating and verifying longwall stress models.
-
1/1/2020 - Reports of InvestigationsThis part 1 of a two-part series describes ground stress in mining based on measurements and observations at two western mines.
-
4/8/2019 - Contracts and cooperative agreementsA contract to develop an inexpensive LIDAR scanner to detect minute roof and rib changes that could serve as an early warning system for mines.
-
4/2/2019 - Peer reviewed journal articlesA study on the effect of the discontinuity dip direction on square and rectangular hard rock pillars.
-
2/1/2018 - Contracts and cooperative agreementsA contract to adapt and use existing pattern-detection technology to identify minute changes in the mine environment.
-
1/16/2018 - Research areasGround Monitoring Topic Page
-
1/16/2018 - Research projectsA project to develop engineering-based stress analysis procedures for improved assessment of stress-related hazards due to full extraction mining.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program